How can I link my EUFY genie to a different Wi-Fi network?
- Tap Open the WiFi settings menu.
- Select the WiFi network name of the Eufy Genie from the list. The WiFi network you seek has the eufy Genie-XXXX identifier pattern.
- After selecting the appropriate WiFi network, hit the left-most back arrow to return to the EufyHome app.
How can I reset the factory settings on my eufy?
Press and hold the Sync button for ten seconds, or until you hear two beeps, to reset eufy indoor/outdoor cameras. The Sync button is often positioned on the device’s rear. The camera’s default settings will be restored.
How can I reset my eufy vacuum?
Press and hold the button for 10 seconds to reset the Wi-Fi connection on RoboVac. When the settings have been reset, you will hear a voice prompt, and the WiFi status indicator will blink blue slowly. To reset the Wi-Fi connection, simultaneously press and hold for three seconds.
How can I reset my eufy door sensor?
Press and hold the Sync button for 10 seconds to reset the eufy battery doorbell. The doorbell’s Sync button is positioned on the back side. If your doorbell is already mounted on the door frame or the wall, please use the included detaching pin or a paper clip to remove it from the mounting bracket.
Why can’t my EUFY connect to Wi-Fi?
Ensure that your Wi-Fi network and phone are functioning correctly. 4. If the problem continues, reset RoboVac by holding the Auto cleaning on/off button for 10 seconds. After hearing one beep and seeing the Wi-Fi status light begin to blink, configure the Wi-Fi connection by following the instructions in the EufyHome app.
How can I link my EUFY vacuum to a Wi-Fi network?
Go to your phone’s Wi-Fi settings and connect to the “eufy RoboVac xxxx” network, then return to the EufyHome app. Please wait while the connection is established. Once the RoboVac is linked, it is time to give it a name. After naming it, the configuration is complete!
Why does my Eufy not function?
– Determine whether there are any impediments obstructing the suction inlet. – Empty the dust collection and vacuum or scrub the filters with a cleaning brush. – Replace the filter/brush to see whether the suction is strengthened. – Determine whether the filters are damp due to liquids on the floor.
How can I upgrade the firmware on my eufy?
To upgrade the firmware, on the device’s home page, press “More” in the top right corner, then tap “Firmware Update.” During the firmware update procedure, Eufy Genie must remain turned on. The Eufy Genie system will restart automatically after the firmware update is complete.
Why is my Eufy vacuum doing circular motions?
To inspect wheels: – If the RoboVac only spins in one direction, clean the wheels and tap/shake them to ensure that they are flexible and can spring back.
Why is the light on my Eufy always solid red?
If your RoboVac displays a red charging indicator, try the following: Reconnect the charging base to the adapter. Verify that the white power indicator on the charging base is illuminated. – Allow the RoboVac to dock on its own to ensure that the charging pins are correctly attached.
How long does the battery of eufy last?
Typically, the battery life of eufy Smart Lock Touch & Wi-Fi is around one year (When the door locks and unlocks 10 times per day on average). The 1-year battery life was evaluated using a laboratory scenario.
Why does my EUFY doorbell not detect motion?
Please ensure that your camera is online and that the battery is charged. You may test your app’s motion detection and activate the motion detection button. Steps: Tab >… > Camera Settings > Motion Detection.
Why is eufy door lock unavailable?
Please try the following solutions if the eufySecurity app indicates that your smart lock is offline. 1. Ensure your lock has sufficient power and is operational (try fingerprint or passcode). If not, replace the batteries or charge the USB connector of the touch-screen and wifi smart lock.
How can I reattach my EUFY vacuum cleaner?
Please press and hold both buttons on the vacuum’s top until you hear the audio prompt “Reset WiFi” Ensure that you can hear the voice alert. A steady flashing light indicates “connection,” whereas a speedy flashing light indicates “connecting.”
Must EUFY be completely charged in order to connect to Wi-Fi?
Depending on the model, the Eufy RoboVac comes with a pre-installed rechargeable battery that may last between 100 and 180 minutes. This battery must be completely charged before usage, so if you use this device on a low battery, it may lose internet connection.
Is my Wi-Fi 2.4 GHz or 5 GHz?
Press and hold the WiFi icon in the Notification Panel to see the WiFi settings page. Choose the network settings (tap the gear icon or menu icon). Depending on the version of Android, verify: The “Frequency” option displays either 2.4GHz or 5GHz.
What is a 2.4 GHz wireless network?
The 2.4 GHz frequency of the wifi router provides a large coverage area and is more effective at penetrating solid objects, with a useful speed of 50 to 70 Mbps (subject to real world scenarios). However, it has a smaller data range and is particularly susceptible to interference and disruption.
How can I disable Wi-Fi on my eufy robot vacuum?
– While charging RoboVac, press and hold the RoboVac button for 20 seconds. Two beeps will indicate that RoboVac has entered Reduced Power Standby mode; Wi-Fi will be deactivated in this mode.
Why did my robot vacuum quit working?
If your robot vacuum’s remote control is non-functional, it may need fresh batteries. If the robovac is not turning on or requires more frequent recharging, you may need to replace the unit’s battery.
What does the blue light indicate on EUFY?
Solid blue. Charging. Solid red (when LED is enabled) Motion detection or recording an event. Blinking red.
How can I tell if my EUFY battery is defective?
No beeping when charging for around two hours. Approximately 2.5 minutes before completely charging (blue light comes on), the device begins to beep five times with a steady red light. This 5 beeps three times before stopping. The orange light then flashes for almost another minute.
How can I update my EUFY application?
In accordance with your phone’s update settings, the eufy Security App will update itself automatically in the background if your device is connected to Wi-Fi and has sufficient battery life. You may also check for updates on Google Play or the App Store.
How long does EUFY update take?
When the eufy security device has network connectivity (is connected to Wifi), it will often change its firmware in the early morning hours automatically. If the automated update fails, please wait an additional twenty-four hours. It will be updated once more after 24 hours. You may use the present version.
How can I reset my HomeBase EUFY 2?
Press the “CYCLE” hole (located above the SYNC/ALARM OFF button) on the back of the HomeBase 2 until you hear “HomeBase is resetting” to do a factory reset. For the Indoor Cam Series, press and hold the SYNC button for ten seconds, or until you hear two beeps.
How can you prevent EUFY from being stuck?
You may remove these seats while the robot is in operation. Sometimes Eufy gets trapped under dressers and credenzas, but not always; thus, it just requires a little extra space. We affixed some of those Teflon or button feet to the bottoms of the furniture, and voila, no more sticking!