Ring Sensor Guide for Garage Doors

The Ring Alarm is an excellent way to keep your house safe. You can use it to secure the majority of your house, but what about your garage? After all, there is just another method by which burglars may get access to your house.

The Contact Sensors, which are a part of the Ring Alarm System, are touted for use with standard doors and windows, among other things. Protective measures for garage doors are also an option. In other words, can you use your garage door opener’s contact sensors to good use? To be able to answer that, it’s necessary to understand how they operate in the first place.

In what ways does the Ring Alarm System differ from other types of alarm systems?

The Ring Alarm System was launched in July 2018 by Ring. To keep your house secure, it alerts you to any possible dangers and intruders.

Box for the Ring Security Alarms

Included in the Ring Alarm System are the following features:

Stationary Base


Extender of Sight

Detectors of motion.

Infra-Red Detectors

If you order a larger kit, you’ll get more motion sensors and contact sensors. You may also buy each of these parts separately if that’s more convenient for you.

The Ring Alarm and the Ring Alarm Pro are both variations of the Ring Alarm System. The base station of the Ring Alarm Pro is equipped with an eero 6 Wi-Fi router. As a result, your Ring Alarm and all linked devices will operate more quickly and responsively.

In the case of a break-in or other danger to your family’s safety, you need to know precisely what’s going on at the moment it happens.

The Ring Base Station is the most critical part of the system.

A Ring Alarm base station that is installed on a wall.

This diagram shows how all of the alarm system’s components are connected to one another. Ring Alarm’s components, in contrast to the Ring cameras and video doorbells, are linked through Z-wave. When using the Base Station, Z-wave signals are ‘translated’ into Wi-Fi signals so that they may be sent to a computer and used with the Ring app.

Because of Z-reactivity, Wave’s Ring relies on it for their Alarm components. In many cases mesh networks such as Z-Wave are more stable and self-healing than Wi-Fi. A node, or point of contact, is a device on a network. Signals bounce across nodes instead than halting completely when one node does not reply.

See also  How To Check Ring Alarm Base Station Health

In order for your Ring Base Station to function properly, everything must be within a distance of 250 feet. As a result, the Range Extender is included with the kits and strongly recommended to ensure smooth operation.

Is it possible to describe the Ring Contact Sensor in more detail?

Door and Window Contact Sensors are included in Ring Alarm kits. Add-on devices are also available for purchase.

My front door has a Ring Contact Sensor installed.

If any of your doors or windows are ajar, or if the sensor itself is tampered with, you will be alerted by these devices.

My Ring Alarm’s event log shows a few tampering errors.

Although they may be screwed in, they are most often attached to a variety of surfaces using an adhesive backing. Ring explains that the non-magnet side of the sensor should have roughly a half-inch of space. The battery compartment can be readily accessed, making it easy to change the batteries when necessary.

Ring’s Indoor Contact Sensors were the company’s first product line. However, a new Outdoor model has just been introduced. The Outdoor version is IP 66 weatherproof, unlike the Indoor version. As a result of this, it has a much greater price. Outdoor version is $49.99, and Indoor version is $19.99.

There are two pieces to the Ring Alarm Sensor: one that houses the battery, and the other that houses the magnet

Sensor with the Z Wave logo and pin partially exposed after being partially opened

When a door or window is opened, the sensor is triggered by the magnet. An alarm is delivered to your phone or other smart device when the battery’s connection to the battery base is disrupted.

The magnet’s disruption is based on the sensor’s ability to detect movement or the opening of a door. Can it be used for garage doors, too, in light of this?

For your garage door, may you utilize Ring Contact Sensors?

Ring has said that its Contact Sensors are not meant to be used on garage doors, although some users have found a workaround. The Outdoor version of Ring’s Contact Sensors is probably the best one to test this with.

Items in garages are often exposed to the elements including wind, rain, and snow even if they are kept in the house. When the door is open, the weather may still get in from the bottom or the sides, depending on how bad the weather is. Make sure that the contact sensor is able to resist any weather conditions that may arise

See also  WhAt Is a Ringing Sound Alarm

Distance is the second factor to consider when it comes to site selection. Most houses have a separate area for the garage. In particular, this is true for people who seem aloof. The Base Station serves as the center for all Ring Alarm devices, so you’ll want to be sure it can interact with it. The Base Station may need to be relocated or you may need to purchase an additional Range Extender in order to maintain a clear signal

The Ring Alarm Range Extender’s blue Ring box.

Where should the garage door sensor be placed?

A garage door that opens from the bottom up

In many cases, the bottom of the garage door opens. You may, however, want to avoid putting one side of your sensor down. If you’re a cautious driver, you might easily drive over it. It’s recommended to mount it on a wall or garage door frame at a height of at least 1-2 feet above ground level. At this height, it will be less vulnerable to the weather, but it will still be able to tell whether the door has been opened or closed.

Doors That Open “Up And Over”

My up and over garage door from the inside.

It’s also possible that putting the touch sensor higher on a “up and over” garage door would work better. According to these images, the garage doors begin to deviate from the frame at the top:

When my garage door is closed, I take a peek.

See what it looks like when the garage door to my house is open.

In any case, after inspecting your garage door and deciding on the ideal place for the contact sensor, the following step is to choose how to attach the two pieces of the sensor. Disruption of the magnet’s connection will cause an alarm if the Garage door opens.

However, even though the contact sensor may be placed at various angles, the accompanying adhesive strips may not always be suitable for attaching the contact sensor:

A garage door with a Ring Contact Sensor installed is an excellent example.

The back of a Ring Contact Sensor has glue and screw holes.

There are no alternative possibilities since the Contact Sensor was never intended to function with garage doors.

Placement/Options for Different Sensors

Cameras may be an alternative if a Ring Contact Sensor isn’t an option for your garage door. Ring’s collection of cameras and video doorbells may be connected to your Ring Alarm System to function together as a single unit.

See also  How Dies A Ring Flood Alarm Work

Outside, the Ring Spotlight Cam has been placed.

It is possible to get an alert if the garage door begins to open or if there is any movement near the garage door that you aren’t expecting. Either outside or within your garage, a camera may be installed – or both!

Color night vision in my garage

If your Ring Base Station isn’t that near, but you have a strong Wi-Fi connection, this may be a more viable choice. A Wi-Fi extender may even be simpler to operate than a Range Extender.

As can be seen on the page labeled “Works with Ring,” there is an additional option available.

The Ecolink Garage Door Tilt Sensor may be purchased for $29.99 at this location. This sensor allows you to monitor your garage door status from the Ring app. Despite the fact that this device is compatible with the Ring Alarm System, it does not operate with the 24/7 Professional monitoring service that is available as an extra add-on. As a result, it will not be able to wake you up in the morning.

The Ring Alarm Motion Sensor may also be used, however this may have limited effectiveness. Using it for a garage door would necessitate putting it on the inside of the house, and ideally not too near to the ground where the elements may still get to it.

Using the Motion Sensor, you may be alerted when the garage door is open and anything moves.

Remember the Garage!

Ring Contact Sensors may be utilized to assist secure your garage door, despite the fact that they are normally employed for windows and doors. In order to get the finest effects, you must, however, carefully consider where you position it.

It is also possible to use a Ring Motion Sensor, Ecolink Garage Door Tilt Sensor, or even one of Ring’s cameras instead of the Ring Contact Sensor. These sensors will notify you whenever motion is detected, so you can take the appropriate precautions to keep your house secure.

Leave a Comment