How To Factory Reset Eufy Homebase 2

How can I reset the factory settings on my eufy?

Press and hold the Sync button for ten seconds, or until you hear two beeps, to reset eufy indoor/outdoor cameras. The Sync button is often positioned on the device’s rear. The camera’s default settings will be restored.

How can I rejoin my HomeBase 2 eufy device?

  1. Check your connection to the Internet:
  2. Restarting your HomeBase:
  3. Rebooting your router:
  4. Reinitialize HomeBase:
  5. Verify the Ethernet cable:
  6. Reset the residential router:
  7. Connect to the 2.4GHz frequency:
  8. Check to see whether the HomeBase firmware has been updated:

How can I link my HomeBase 2 to the Internet?

1. HomeBase must use an Ethernet cable to connect to a router during the setup procedure. 2. HomeBase may be converted to a Wi-Fi connection under the Device Tab > Select HomeBase > HomeBase Settings > General > Wi-Fi Connection after first configuration.

How can I reconnect my HomeBase eufy?

Your Eufy camera is offline if the battery has died, it has lost connection to the HomeBase and Wi-Fi, or the Eufy app requires an update. Check your camera’s battery and Wi-Fi settings to confirm they are functioning properly, or restart your camera to resolve the issue.

How can I upgrade the firmware on my eufy?

To upgrade the firmware, on the device’s home page, press “More” in the top right corner, then tap “Firmware Update.” During the firmware update procedure, Eufy Genie must remain turned on. The Eufy Genie system will restart automatically after the firmware update is complete.

How can I remove memory from Eufy?

You may clean or format the SD card or local storage in the application. Camera/Doorbell Settings > Camera Storage > Clear Storage / Format. Caution: formatting local storage will destroy all data saved on the device permanently.

How can I link Eufy HomeBase to a new Wi-Fi network?

  1. Use the eufySecurity application.
  2. Tap the HomeBase/Wi-Fi Chime/Wi-Fi Bridge or “” in the device tab.
  3. Configuration > General > Wi-Fi Connection.
  4. Tap Connection, choose Wi-Fi setup, then input the network’s password.
See also  Which Eufy Camera Is The Newest One

My Eufy HomeBase will not connect to Wi-Fi.

Here are some potential reasons why a Eufy camera cannot connect to the HomeBase: The HomeBase lacks electricity. The HomeBase does not have an internet connection. Your mobile device is not linked to the internet.

Does the Eufy HomeBase 2 need a router connection?

The homebase must be connected to the router’s LAN port using a network cable. After the network has been configured, the Eufy security app allows you to switch the network connection to wifi mode.

Does Eufy HomeBase need an Ethernet connection?

Does the HomeBase 2 connect wirelessly or does it need an Ethernet cable? The HomeBase must be linked to an ethernet cable during the first setup process before it can be connected to WiFi.

Why is the home base of my EUFY flashing blue?

Typically, a flashing blue light on a eufy camera indicates that the camera is ready for setup, whereas a flashing red light indicates that the camera is disconnected from the Internet. If the camera is flashing both colors, its firmware is being updated.

Does Eufy HomeBase 2 function as a wifi extender?

The Homebase from Eufy serves as a Wi-Fi repeater, creating a new network after connecting to your router. This differs from a Wi-Fi extender, which only amplifies your router’s existing signal without increasing its intensity.

Why is HomeBase 2 not available?

If HomeBase 2 goes down, this is most likely due to your HomeBase losing Internet connectivity. Here are some recommendations for you: 1. Please verify that the Ethernet cable and power adapter are securely attached; if so, both the HomeBase 2 status LED and the Ethernet port LED will be lighted.

See also  Is Eufy Doorbell Compatible With Google Home

How does HomeBase 2 vary from HomeBase?

Homebase of eufyCam is equipped with a backup battery. -Homebase 2 does not have a Micro SD card; instead, it has 16GB of eMMC storage, which is more reliable and provides quicker access than microSD. Additionally, it has a USB connector that supports USB storage.

Why is the Eufy HomeBase red?

HomeBase takes around one minute to start up; after HomeBase has completed booting, the red LED will turn white. Please do not interfere with the procedure. Ensure that the Ethernet wire is securely attached to your router; after the cable is securely connected, the LED at the Ethernet port will light up.

How can I update my EUFY application?

In accordance with your phone’s update settings, the eufy Security App will update itself automatically in the background if your device is connected to Wi-Fi and has sufficient battery life. You may also check for updates on Google Play or the App Store.

What does EUFY HomeBase do?

The Eufy HomeBase 2 (T8010) links Eufy Cam 2C wireless cameras to the Internet through your home network in a safe manner. Low Frequency Wireless and 2.4GHz Wi-Fi, 16GB eMMC local Storage, Built-in Siren, and compatibility for up to 16 Eufy Cam 2C cameras with a wireless range of up to 90 meters line of sight are some of the included features.

Why is my EUFY camera not functioning?

If you’re still experiencing issues, consider rebooting your Eufy device to resolve them. Locate the SYNC button on your camera and push it five times in rapid succession within three seconds. You should hear two beeps before the camera resets itself. Once it has completed resetting, attempt the pairing procedure again.

See also  Why Is My Eufy Not Working

How can I uninstall a gadget from eufy?

Go to the gadget and press the gear wheel. There should be an option to delete devices at the bottom.

How can I erase all events on eufy?

I just go to the events page, press the pen/paper symbol, select all, and then tap the trash can button.

What happens when the SD card is full?

When the memory is filled, the oldest video will be replaced automatically. Please feel free to email us at [email protected] or phone us at +1 (800) 988-7973 if you have any more queries. There was an issue, I’m sorry.

How can I configure HomeBase 2?

  1. Tap Add Device on the Device screen, and then pick HomeBase 2
  2. Follow the on-screen instructions to turn up HomeBase 2 and connect it to your home network using the Ethernet connection provided.
  3. Connect your smartphone to the same WiFi network that the HomeBase is linked to by tapping Next.

Will Eufy function with 5GHz Wi-Fi?

No, eufySecurity devices are only compatible with 2.4GHz Wi-Fi.

How can I link the 2.4 GHz band to Eufy?

  1. Unlock your Android smartphone and then hit Settings.
  2. Find Wi-Fi Setting.
  3. Enable Wi-Fi by activating the Wi-Fi button.
  4. Choose the 2.4GHz WiFi you selected to use in the preceding stage.
  5. Enter the password for your chosen 2.4GHz WiFi network.

How can I rejoin my HomeBase account?

Launch the eufySecurity app > Devices tab > choose the HomeBase >General> Connection > Wi-Fi Setup > choose your 2.4GHz WiFi network > input the password for your 2.4GHz WiFi network and hit Next > HomeBase will join immediately to the…